Installation method and application notice of intelligent water meter

Installation method of intelligent water meter

1, first select the appropriate location of the installation of smart water meters, to find the correct installation caliber.

2, when installed, remember to install horizontally. The surface of the intelligent water meter is upward, and an arrow is arranged on the outer shell of the intelligent water meter, and the direction of the flow of the water meter is consistent with the direction of the arrow when installing. Intelligent water meter is not suitable for installation in places where the sun is exposed, and will be flooded, will be contaminated places, intelligent water meter to read, so in the installation, of course, should also pay attention to the convenience of disassembly and meter reading. In order to avoid the water meter failure, in the installation of new pipes, it is necessary to clean the debris inside, this will effectively reduce the water meter unnecessary trouble.

3, the smart water meter should be installed before and after a valve, so that you can control the flow of water, the use of intelligent water meters, these two gates should be opened. In addition to install valve should be installed in the pipe downstream, the pipe is very necessary, straight in length also have certain requirements, 10D is on the upstream pipeline, 5D is on the downstream piping requirements.

4, the installation of water meters should also take into account a factor, the accuracy of intelligent water meters, in order to ensure accurate metering of water meters, we should install the downstream pipe above 0.5 meters above the water gauge position. Another effect of water meter is clean water in the pipeline, if there is debris is likely to result in inaccurate measurement, so we should pay more attention to in common usage, there is debris it as soon as possible to clean up.

Notes on the use of intelligent water meters

1, the smart water meter needs to replace the battery, after the replacement, remember to damp the cover, tighten the screws, otherwise, the smart water meter will not work. In this way, the intelligent water meter can not play its proper role.

2, in the long-term do not use water, remember to shut down the upstream and downstream of the valve, otherwise it is easy to cause damage to intelligent water meter, and this kind of damage, the company will not be responsible for.

3, water meters must be one of moisture, antifreeze, especially in the winter, we must make certain measures for the protection of intelligent water meters. In addition, if there is such a fault, that is, the intelligent water meter on the electronic display and the actual word wheel is not the same, there is a measurement error phenomenon, we have to look at the actual word wheel.

The above is the intelligent water meter installation and use of skills, to provide high-quality low-priced Yidu intelligent water meter water meter and the accessories and management system for you.